{"id":955,"date":"2022-03-29T11:41:58","date_gmt":"2022-03-29T09:41:58","guid":{"rendered":"https:\/\/el-bicho.menn-online.net\/?p=955"},"modified":"2024-04-06T13:22:57","modified_gmt":"2024-04-06T11:22:57","slug":"der-kabinenbau","status":"publish","type":"post","link":"https:\/\/el-bicho.menn-online.net\/en_US\/2022\/03\/29\/der-kabinenbau\/","title":{"rendered":"Cabin construction"},"content":{"rendered":"



<\/p>\n\n

\n
\"\"
After I had the subframe back on the main frame, the floor went onto the subframe:<\/strong><\/figcaption><\/figure>\n<\/div>\n\n\n
\n
\"\"
Since I'm not a professional welder, I expected some warping in the inner frame. To still build the cabin square, I positioned the front wall and one side panel on each side and glued them together. This gave me a square reference point for aligning the frame.<\/strong><\/figcaption><\/figure>\n<\/div><\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"
When cutting the panels to size<\/strong><\/figcaption><\/figure>\n\n\n\n
\"\"
The frame had less warping than expected<\/strong><\/figcaption><\/figure>\n\n\n\n
\"\"
The individual page elements <\/b>I then<\/strong> to the frame and then glued them at the tongue and groove contact points. <\/strong><\/figcaption><\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"
The finished cabin with the aluminum angles glued on.<\/strong> <\/figcaption><\/figure>\n\n\n

Here's a video I filmed in addition to the pictures:\u00a0

<\/p>\n